Table of Contents
Advertisement
When installing: Insert the notched end of the memory module into the memory slot. Press the memory
module in firmly, and pivot it downward until it snaps into place. Ensure that the memory module is firmly
installed in the slot and does not move easily.
1060 Wireless LAN card
For access, remove this FRU:
• "1010 Base cover assembly" on page 35
Removal steps of the wireless LAN card
Step
Screw (quantity)
2
M2 × 3 mm, flat-head, nylon-coated (1)
When installing: Plug the gray cable into the main connector, and the black cable into the auxiliary
connector on the card.
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 5
Removing or replacing a FRU
39
Advertisement
Table of Contents
