Table of Contents
Advertisement
5. Clear the Turn on fast startup check box, and then click Save changes.
To disable the built-in battery:
1. Enter the setup utility.
2. Select Configuration ➙ Disable Built-in Battery and press Enter.
3. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.
Removing the nano-SIM-card and nano-SIM-card tray (for selected
models)
Note: If the computer you are servicing has a nano-SIM card installed, remove the card with the tray
together.
Removing the SD card
If the computer you are servicing has an SD card installed, remove the SD card before you start the servicing.
Push the SD card inward a little bit
card slot
2
.
Note: After you finish the servicing, ensure that you install the SD card back into the slot firmly.
Removing the pen dummy (for selected models)
If the computer you are servicing has a pen dummy installed, remove the pen dummy before you start the
servicing.
34
Lenovo 13w Yoga Gen 2 Hardware Maintenance Manual
1
. Then, release it. The SD card ejects. Gently slide the card out of the
Advertisement
Table of Contents
