Auto Gain Mode/Intensity
Platform Settings
I/O Setting
User-defined LED
4.7
Project Management
ICAM-500 allows users to save camera setting as a project and provides auto-run,
import and export functions.
4.7.1
Auto-run
ICAM-500 allow users to set up an auto run project function while camera boots up.
Select the project and enable auto-run function and ICAM-500 will auto execute the
project while the camera boots up.
ICAM-520/500 User Manual
Gain
Range(0~24)
Debounce time
Edge Trigger (Rising)
Programming Mode
Direct Output
Reverse on/off
Delay time (ms)
Figure 4.13 Auto run
34
DI 0/1
DO 0/1
Output High
Output Low
Green
Orange
Yellow