Advertisement
Table of Contents
- 1 Table of Contents
- 2 Safety
- 3 Controls Description
- 4 Sound & Vibration Levels
- 5 Assembly Instructions
- 6 Attaching Implements
- 7 Operation
- 8 Maintenance Guide
- 9 Maintenance Programme
- 10 Service Information
- 11 Troubleshooting Guide
- 12 Risk Assessment
- 13 Service Record
- 14 Manufacturer's Information
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BCS PowerSafe 710
Summary of Contents for BCS PowerSafe 710
- Page 1 PowerSafe Two Wheel Tractors ® Manufactured by BCS S.p.A. Models 710 ● ● ● ● Operating Instructions Before commissioning the machine, read operating instructions and observe warning and safety instructions. PLEASE ALSO READ ORIGINAL BCS INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
BCS Two Wheel Tractor Power Unit Contents Page 3 Safety Page 4 Controls Diagrams - 710 & 728 Page 5 Controls Diagrams - 738 & 740 & 750 Page 6 Controls Description Sound & Vibration Levels Page 7 Assembly Instructions... -
Page 3: Safety
BCS Two Wheel Tractor Power Unit Safety ALWAYS read the original BCS manual first ALWAYS start the engine in the open air DO NOT smoke when refuelling DO NOT mix OIL with the fuel ALWAYS stop the engine before making any adjustments, refuelling, moving or... - Page 4 BCS Two Wheel Tractor Power Unit Controls BCS 710 BCS 728 Page 4 TWT/PU/0617...
- Page 5 BCS Two Wheel Tractor Power Unit Controls BCS 738 BCS 740 & 750 Page 5 TWT/PU/0617...
-
Page 6: Controls Description
BCS Two Wheel Tractor Power Unit Controls Description Models 710 - 728 - 738 - 740 - 750 OPC LEVER (red lever that stops the machine when released) ENGINE STOP LEVER CLUTCH CONTROL LEVER GEAR LEVER (the location of different gears are shown on the selector) -
Page 7: Assembly Instructions
BCS Two Wheel Tractor Power Unit Assembly Instructions 1. Remove the machine from its packing case. 2. Rotate the handlebar stem to the operating position and fit the handlebars - check operation and routing of cables. 3. Fit the wheels, ensuring the correct rotation (see diagram A below) and check the tyre pressures (20psi). 4. Fit the gearbox dipstick. -
Page 8: Attaching Implements
BCS Two Wheel Tractor Power Unit Attaching Implements Models 710 - 728 - 738 - 740 Implements are either mounted directly to the flange (fig. 12, A) or coupled with the quick release assembly (fig. 13, C) . It is important that nuts (fig. 13, D) which fasten the implement and the bushing are well tightened. - Page 9 BCS Two Wheel Tractor Power Unit To Start Petrol Engine Using the dipstick provided, check the engine oil level. Top up with 10w/40 oil if necessary. Check fuel level. Only use unleaded petrol from a clean container. Never re-fuel when the engine is hot or running.
-
Page 10: Operation
BCS Two Wheel Tractor Power Unit Operation Use handlebar adjuster (G) to set handlebar height. Hold the handlebar and pull up the clutch lever (C). Depress the OPC lever (A) and select the correct working speed using the gear lever (D). -
Page 11: Maintenance Guide
BCS Two Wheel Tractor Power Unit Maintenance Guide For engine maintenance please refer to engine manufacturers manual. After every hour of operation stop the engine and remove the spark plug cap. Check engine oil level (recommended oil SAE 10w/40). Replace the spark plug cap. -
Page 12: Maintenance Programme
BCS Two Wheel Tractor Power Unit Maintenance Programme OPERATION EVERY EVERY EVERY EVERY 6 WEEK MONTH MONTHS ENGINE Check engine oil level 10w/40 See separate engine manual GEARBOX Check gearbox oil level & (see page 13) CONTROLS Check nuts & bolts... -
Page 13: Service Information
BCS Two Wheel Tractor Power Unit Service Information Every Week • With the machine on a level surface, check the gearbox oil level, top up as necessary using the correct oil as listed below. The gearbox oil level should reach between the two notches on the dipstick (fig. 2, D) . - Page 14 BCS Two Wheel Tractor Power Unit Service Information Gearbox Oil Quantities BCS 710 / 728 / 738 = approx 2.3 litres BCS 740 / 750 = approx 2.6 litres Oil Type Fuchs Titan Hyp 90 Valvoline 80w-90 GL-5 Morris EP80w/90 API GL5...
-
Page 15: Troubleshooting Guide
BCS Two Wheel Tractor Power Unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY Unable to select gear Pressure washing has removed Grease the detent ball and lubrication of gear lever detent quadrant. ball. Unable to pull engine over Machine has been tipped on... -
Page 16: Risk Assessment
BCS Two Wheel Tractor Power Unit Risk Assessment HAZARDS RISK LEVEL ACTION NEEDED General The machine should only be used by trained operators. Machine tipping over Do not use on slopes over 25 Machine running away Red stop lever disengages the drive to the implement if the operator releases the handlebars. -
Page 17: Service Record
BCS Two Wheel Tractor Power Unit Service Record To ensure your machine is kept in peak condition, we recommend that you have it serviced regularly by one of Tracmaster’s Authorised Agents. To find out who your local Authorised Agent is, contact Tracmaster on 01444 247689. SERVICE SCHEDULE First 2 Weeks or 30 Hours of Work - whichever is sooner (see page 13) - Page 18 BCS Two Wheel Tractor Power Unit IMPORTANT READ THE OWNER’S MANUAL FOR THE RELEVANT WORKING IMPLEMENT. PLEASE CONTACT TRACMASTER ON 01444 247689 FOR ANY FURTHER INFORMATION OR ASSISTANCE OR VISIT WWW.TRACMASTER.CO.UK Page 18 TWT/PU/0617...
-
Page 19: Manufacturer's Information
Tracmaster Ltd is the UK distributor for these models, the BCS 710/728/738/750/750. BCS S.p.A. has been at the forefront of developing cutting edge agricultural machinery since its formation in 1943, when their founder developed a self-propelled motor mower. Tracmaster Ltd has been the UK distributor for BCS pedestrian equipment since 1984. - Page 20 © Tracmaster Ltd 2017. Specifications are subject to change without prior notice. Tracmaster Ltd, Sovereign Centre, Victoria Road, Burgess Hill RH15 9LR T: +44 (0) 1444 247689 F: +44 (0) 1444 871612 W: www.tracmaster.co.uk E: info@tracmaster.co.uk...
Need help?
Do you have a question about the PowerSafe 710 and is the answer not in the manual?
Questions and answers