CMC Rescue ENFORCER Instructions For Use

MAINTENANCE
Clean and dry this equipment after each use to remove any dust, debris, and moisture.
During use, carrying, and storage, keep the equipment away from acids, alkalis, and strong
chemicals. Do not expose the equipment to flame or high temperatures. Store in a cool, dry
location. Do not store where the equipment may be exposed to moist air, particularly where
dissimilar metals are stored together.
Do not store for long periods with the batteries installed as they may leak and corrode the
interior of the device.
REPAIR
All repair work shall be performed by the manufacturer. All other work or modifications may void
the warranty and releases CMC Rescue, Inc. from all liability and responsibility as the manufacturer.
SAMPLE LOG
The sample log suggests records that should be maintained by the purchaser or user of
rescue equipment.
Equipment Inspection and Maintenance Log
Item #
Brand / Model
Date How Used or Maintained
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117 USA
|
800 235 5741 805 562 9120
|
email info@cmcrescue.com
cmcrescue.com
Date in Service
Strength
Comments Name
ISO 9001: 2008 Certified
©2016 CMC Rescue, Inc.
300750.00.021916
ENFORCER
Load Cell Kit
INSTRUCTIONS FOR USE
PRODUCT LABEL
IMPORTANT INFORMATION, PLEASE READ AND SAVE.
WARNING!
n FAILURE TO FOLLOW THESE INSTRUCTIONS, OR IMPROPER
USE OF THIS EQUIPMENT COULD RESULT IN SERIOUS INJURY
OR DEATH.
n THIS EQUIPMENT HAS BEEN DESIGNED AND MANUFACTURED
FOR USE BY EXPERIENCED PROFESSIONALS ONLY.
DO NOT ATTEMPT TO USE THIS EQUIPMENT WITHOUT PROPER
n
TRAINING.
USE, INSPECT, AND REPAIR ONLY IN ACCORDANCE WITH
n
THE MANUFACTURER'S INSTRUCTIONS.
THIS SWIVEL MEETS THE AUXILIARY EQUIPMENT REQUIREMENTS
OF NFPA 1983, STANDARD ON LIFE SAFETY ROPE AND EQUIPMENT
FOR EMERGENCY SERVICES, 2012 EDITION.
EMERGENCY SERVICES AUXILIARY EQUIPMENT
5F04
IN ACCORDANCE WITH NFPA 1983-2012.
300750 GENERAL USE (G) MBS 50 kN (11,240 lbf)
Structural parts manufactured in the USA using domestic and foreign materials.
Assembled in the USA using domestic and foreign electronic subassemblies.