CMC Rescue SKEDCO DRAG-N-LIFT Quick Start Manual

CARRYING, MAINTENANCE & STORAGE
During all use, carrying, storage, and transport keep the equipment away from acids, alkalis, exhaust emissions,
rust and strong chemicals. Do not expose the equipment to direct heat, flame, or high temperatures or other
adverse environmental conditions. If the equipment becomes soiled, it can be washed in cold water with a mild
detergent that is safe for use with nylon and polyester. Rinse thoroughly. Do not use a pressure washer. Air dry in
temperatures between 10° C and 30° C. Do not dry the equipment in direct sunlight or using an automatic dyer.
Lubricate moving parts as needed. During storage and transport, protect the equipment from heat, direct sunlight,
moisture, chemicals, and external loads or impacts. Do not store where the equipment may be exposed to moist
air, particularly where dissimilar metals are stored together. Consult with the manufacturer in case of any doubt.
WARRANTY & REPAIRS
If your CMC product has a defect due to workmanship or materials, please contact CMC Customer Support at
info@cmcpro.com for warranty information and service. CMC's warranty does not cover damages caused by
improper care, improper use, alterations and modifications, accidental damage or the natural breakdown of
material over extended use and time. All repair work shall be performed by the manufacturer. All other work or
modifications void the warranty and releases CMC from all liability and responsibility as the manufacturer.

SAMPLE INSPECTION AND MAINTENANCE LOG

The following sample log provides an example of the records that should be maintained by the purchaser or user
of life safety equipment.
EQUIPMENT INSPECTION AND MAINTENANCE LOG
Item______________#______ Date in Service________
Brand/Model_________________ Strength___________
Date How Used or Comments Name
Maintained
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117, USA
805-562-9120 / 800-235-5741
cmcpro.com
ISO 9001 Certified
© CMC Rescue, Inc. All rights reserved
CMC and are registered marks of CMC Rescue Inc.
CMC Control No.: 721800-02IN01_Rev00
DRAG-N-LIFT™ HARNESS
Activities involving the use of this device are potentially dangerous. You
are responsible for your own actions and decisions. Before using this
device, you must:
• Read and understand these user instructions, labels, and warnings.
• Familiarize yourself with its capabilities and limitations.
• Obtain specific training in its proper use.
• Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE
INJURY OR DEATH.
MEETS THE VICTIM EXTRICATION DEVICE
REQUIREMENTS OF NFPA 1983, INCORPORATED IN THE
2022 EDITION OF NFPA 2500, CLASS III.
• 721800-02 CMC/SKEDCO DRAG-N-LIFT HARNESS
Find the latest version of this manual at cmcpro.com.

WARNINGS