CMC Rescue CMC/Roco Cobra Rescue Harness Important Information

The following product labels are located in the keeper situated
in the rear of the harness in the following manner.
NAME:
PHONE:
DATE IN SERVICE:
MODEL NO:
DATE:
LOT NO:
FITS WAIST SIZE:
FITS HEIGHT:
EMERGENCY SERVICES LIFE SAFETY
HARNESS IN ACCORDANCE WITH
NFPA 1983-2012 AND ALSO IN ACCORDANCE
THIS LIFE SAFETY HARNESS MEETS THE
REQUIREMENTS OF NFPA 1983, STANDARD ON
LIFE SAFETY ROPE AND EQUIPMENT FOR
EMERGENCY SERVICES 2012 EDITION, CLASS III.
5F04
THIS HARNESS IS NOT FLAME RESISTANT! DO
MEETS ANSI / ASSE Z359.1-2007 HARNESS REQUIREMENTS
CAPACITY RANGE 130 LBS (59 KG) - 310 LBS (140 KG)
CONSTRUCTED OF NYLON MATERIALS
USE UPPER BACK D-RING FOR FALL ARREST
STERNUM D-RING FOR LIMITED FALL ARREST ONLY
(MAXIMUM 2FT FREE FALL DISTANCE)
ALL OTHER ATTACHMENT POINTS ARE FOR WORK POSITIONING
▲
!
• YOU COULD BE KILLED OR SERIOUSLY INJURED IF YOU
DO NOT READ AND UNDERSTAND THIS LABEL BEFORE
USING THIS LIFE SAFETY EQUIPMENT.
• SPECIAL TRAINING AND KNOWLEDGE ARE REQUIRED TO
USE THIS LIFE SAFETY EQUIPMENT.
• YOU MUST THOROUGHLY READ AND UNDERSTAND ALL
MANUFACTURER'S INSTRUCTIONS BEFORE USE.
• USE AND INSPECT THIS LIFE SAFETY EQUIPMENT ONLY IN
ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS.
DO NOT REMOVE THIS LABEL!
LABELS
____CM
____CM
WITH ANSI Z359.1-2007
NOT REMOVE THIS LABEL!
WARNING
IMPORTANT INFORMATION - PLEASE READ AND SAVE
Product Label
WARNING
• FAILURE TO COMPLY WITH INSTRUCTIONS OR IMPROPER USE
OF THIS EQUIPMENT MAY RESULT IN SERIOUS INJURY OR
DEATH.
• MANUFACTURER'S INSTRUCTIONS SHALL BE PROVIDED TO THE
USER.
• USE, INSPECT, AND REPAIR ONLY IN ACCORDANCE WITH
MANUFACTURER'S INSTRUCTIONS.
• READ ALL OF THE ACCOMPANYING INSTRUCTIONS AND LABELS.
• THIS EQUIPMENT HAS BEEN DESIGNED AND MANUFACTURED
FOR USE BY EXPERIENCED PROFESSIONALS ONLY.
• FOLLOW RECOMMENDED PROCEDURES FOR DONNING AND
ADJUSTING THE HARNESS.
• DO NOT ATTEMPT TO USE THIS EQUIPMENT WITHOUT PROPER
TRAINING.
• THE USER SHALL HAVE A RESCUE PLAN AND A MEANS TO
IMPLEMENT IT WHEN USING THIS EQUIPMENT.
• FOLLOW THE EMPLOYER'S SAFE WORKING PROCEDURES AT
ALL TIMES WHEN USING THE HARNESS.
• THE USER SHALL KNOW AND FOLLOW ALL APPLICABLE OSHA
AND OTHER REGULATIONS PERTAINING TO OCCUPATIONAL
SAFETY.
• DO NOT ALTER OR MISUSE THIS EQUIPMENT.
• ASSURE THAT ANY COMBINATION OF COMPONENTS OR
SUBSYSTEMS, OR BOTH, DO NOT INTERFERE WITH THE SAFE
FUNCTION OF EACH OTHER.
• DO NOT EXPOSE THE HARNESS TO CHEMICALS WHICH ARE
HARMFUL TO NYLON. IF IN DOUBT, CONTACT THE MANUFACTUR-
ER.
• AVOID CONTACT WITH SHARP EDGES OR ABRASIVE SURFACES.
• USE EXTREME CAUTION WHEN USING THE HARNESS AROUND
MOVING MACHINERY OR ELECTRICAL HAZARDS.
EMERGENCY SERVICES LIFE SAFETY HARNESS IN
ACCORDANCE WITH NFPA 1983-2012 AND ALSO IN
ACCORDANCE WITH ANSI Z359.1-2007
THIS LIFE SAFETY HARNESS MEETS THE REQUIREMENTS
OF NFPA 1983, STANDARD ON LIFE SAFETY ROPE AND
EQUIPMENT FOR EMERGENCY SERVICES 2012 EDITION,
CLASS III. THIS HARNESS IS NOT FLAME RESISTANT!
5F04
CMC Rescue, Inc.
6740 Cortona Drive, Goleta CA 93117
805-562-9120 / 800-235-5741
cmcrescue.com
ISO 9001:2008 Certified
©2015 CMC Rescue, Inc. Control No. 20264X.01.122112
CMC / Roco
Cobra
Rescue Harness
Made in USA
of US and foreign components
USA