Table of Contents
Advertisement
2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
1920 × 1080 @ 60 Hz. When the monitor
is powered on at a different resolution,
an alert is displayed on screen: Use 1920
× 1080 @ 60 Hz for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.3 Remove the Base Assembly
for VESA Mounting
Remove the Base Stand
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface, taking care to avoid
scratching or damaging the screen.
2. Press the locking clips to detach
the base stand away from the base
column.
10
1
Advertisement
Table of Contents
