Table of Contents
Advertisement
RP2458 EN new
7/19/02
10:06 AM
Troubleshooting
EN
Recharge function
To charge Ni-Cd/Ni-MH batteries
(not included):
1. Insert 3 rechargeable batteries in
the main unit compartment.
2. Connect the main adapter.
3. Press STOP to start battery charg-
ing.
4. An animated battery logo will be
displayed when charging is in
progress.
5. When the batteries are fully
Troubleshooting Tips
No power, does not work?
• Batteries may be inserted incorrectly.
• Batteries may be empty. Recharge
(only Ni-Cd/Ni-MH battery) or replace
new batteries.
• Connection may be loose if using
AC/DC transformer.
• HOLD button may be activated.
Disc cannot be played?
• Disc may not be inserted correctly with
label side facing upward.
• CD-RW (or CD-R) disc may not be
recorded properly.
Skipping tracks or bad sound quality?
• Disc may be dirty or scratched badly.
• Disc lens may be dirty and need clean-
ing.
• There may be strong magnetic fields
(e.g. too close to TV) near the unit.
15
Page 20
charged, "Done! Batteries fully
charged" will be displayed, and
charging will automatically stop.
7. You can also stop recharge opera-
tion by pressing PLAY button/
removing the AC adapter.
Note: The recharge function can
only be activated in Power off mode.
If alkaline batteries or NO battery
are inserted, unit will display error
message.
Cannot play MP3 disc?
• Clean the disc.
• Make sure files are saved under .MP3
extension. e.g. Rocky08.MP3
• Check that the recorded bit rate is with-
in 32kbps and 320kbps.
• Only audio CD track will be played in
mixed mode disc.
Cannot play WMA songs?
• Check that the WMA bit rate is within
64 kbps and 192 kbps and sampling rate
is within 44 kHz and 48kHz.
• DRM not supported.
• Only audio CD track will be played in
mixed mode disc.
The display shows strange characters?
• Check that file names are created using
the ASCII-ISO 8859-1 (Latin - 1) Table.
More information
Useful advice
Maintenance
• Do not store CDs in damp areas.
Clean the player with a soft cloth, or a
• Do not expose CDs to high
damp chamois leather. Never use
temperatures or direct sunlight.
solvents.
• Do not put any tape or adhesives on
Please respect the environ-
either side of the disc.
ment!
• You should avoid leaving the CD
door open. Dust is liable to impair
Before throwing any batteries away,
performance of the laser optical unit.
consult your distributor who may be
• Do not use your set immediately
able to take them back for specific recy-
after transport from a cold place to a
cling.
warm place : there may be
condensation problems.
Technical specifications:
• Do not touch the playing surface.
* Frequency response: 20Hz to
Make sure that you keep your set
20kHz
away from water and high
temperatures.
Power Supply
• If you do not use your set on battery
• 6.7V DC (through AD/DC adapter
power for more than one month, we
• 3 AAA batteries
advise you to take out all the
batteRies.
• To prevent personal injury, do not
reverse any battery and do not mix
battery types.
• Discard leaking batteries immediately.
Leaking batteries can cause skin burns
or other personal injury.
• Prolonged use of the CD player at full
volume can damage the user's ear.
• The apparatus shall not be exposed to
dripping and splashing.
EN
16
Advertisement
Table of Contents
