Toyotomi UTN/UTG-09AP User Manual page 69

turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is
not available in AUTO, FAN or HEAT mode. This function indicates that
moisture on evaporator of indoor unit will be blowed after the unit is stopped
to avoid mould.
• Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for a few minutes. at low speed. In
this period, Hold fan speed button for 2 seconds to stop indoor fan directly.
• Having set X-FAN function off: After turning off the unit by pressing ON/
OFF button, the complete unit will be off directly.
4 / buttons
Press or button to increase or decrease the temperature. In AUTO mode,
set temperature is not adjustable.
When setting TIMER ON, TIMER OFF or CLOCK, press
adjust time. Refer to CLOCK, TIMER ON, TIMER OFF buttons. When setting
TIMER ON or TIMER OFF press
5 SWING button
Press this button to set up and down swing angle.
6 SLEEP button
In the Cooling or Heating mode, press this button to start sleep mode.
Once you set it up, this symbol
Press this button again to cancel sleep function and
If you deactivate the air conditioner, sleep mode will be deactivated. During
modes DRY, FAN, AUTO, sleep mode is not available.
7 TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient
temperature or outdoor ambient temperature (not available) on indoor unit's
display. The setting on remote controller is selected circularly as below:
When selecting
unit displays outdoor ambient temperature (not available).
or
appears on remote controller's screen.
no display
with remote controller, temperature indicator on indoor
69
button to adjust the time.
icon will disappear.
or button to
GB