Single Tv Output - RCA DRD705RB User Manual

First Things First
Sending the DSS
The most important feature of the agile modulator is that it
creates a unique DSS ® television channel. This unique channel
can be combined with other TV channels on your antenna or
cable system. Combining the signals and distributing them to all
the televisions in your home lets you watch DSS
or local programming on any television connected to your
system by simply changing channels on the TV.
The simplified drawing at the right shows how cable or off-air
®
signals and the DSS output channel can be combined and
routed through a whole-house distribution system (sold
separately). Although not shown in detail, a whole-house
distribution system consists of signal splitter/combiners and
amplifiers to boost both the DSS
cable channels.

Single TV Output

Although the agile modulator is designed for a whole-house
distribution system, you may still need to set the output channel
even if you are running a signal from the OUT TO TV jack to only
one television. The default setting is channel 14 (off-air) and 65
(cable). Try to get a signal on these channels first; then go to
Output Channel in the Options menu to change the agile
modulator setting.
®
Signal to multiple TVs
®
® output channel and off-air or
OFF-AIR ANTENNA
CABLE TV SIGNAL
programming
OR OUT
TO
TV
WHOLE-HOUSE
DISTRIBUTION SYSTEM
TVs IN YOUR HOME
OFF-AIR ANTENNA
OR
CABLE TV SIGNAL
IN
FROM
ANT
OUT
TO
TV
TV
SATELLITE
DISH
DSS
RECEIVER
SATELLITE IN
SATELLITE
DISH
DSS
RECEIVER
SATELLITE IN
17