Table of Contents
Advertisement
Sending the DSS
to Multiple TVs
Selecting an Output Channel
Point and Select Output Channel from the Options menu to
begin the procedure, and then follow the on-screen displays
to select a new output channel.
In the first screen, you indicate whether you are getting local
channels from cable service or off-air broadcasts, and in the
screens that follow, you select an available output channel.
Select Output Channel to begin the procedure
for changing your output channel.
Single TV Output
Although the agile modulator is designed for a whole-house
distribution system, you may still need to set the output
channel even if you are running a signal from the OUT TO TV
jack to only one television. The default setting is channel 14
(off-air) and 65 (cable). Try to get a signal on these channels
first; then go to Output Channel in the Options menu to
change the agile modulator setting.
OFF-AIR ANTENNA
OR
CABLE TV SIGNAL
Output to a single television from the OUT TO TV jack.
44
®
Signal
IN
FROM
ANT
RECEIVER
OUT
TO
SATELLITE IN
TV
TV
SATELLITE
DISH
DSS
Resetting the Agile Modulator
To reset the output channel to the
default (UHF channel 14 or cable
channel 65), simultaneously press the
DISPLAY button and the LEFT ARROW
button (
receiver.
) on the front of the
Advertisement
Table of Contents
