RCA DRD505RB User Manual page 14

First Things First
Connection C
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
To receive DSS ®
• Tune TV to channel 3 or 4 (depending on how you set the
CH3/CH4 switch on the back of the receiver).
To receive off-air programming (no cable box):
1. Turn off VCR and DSS
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and DSS
2. Tune TV to cable box output channel (usually CH2, CH3, or
CH4).
3. Tune cable box to desired channel.
To record DSS ®
1. Tune TV to the channel on which you receive the DSS
®
2. Tune DSS receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2. Turn DSS ® receiver off.
12
programming:
®
receiver.
®
receiver.
programming:
TV
DSS
OUT TO TV
RECEIVER
IN FROM ANT
VCR
IN FROM ANT
CH3
CH4
OUT TO TV
®
signal.
CAUTION
Do not stack electronic
components or other objects on
top of the DSS
Safety Information, inside front
cover.
IN
SATELLITE
DISH
VIDEO R L
AUDIO
SATELLITE IN
CH4 R L
VIDEO
CH3
AUDIO
OFF-AIR ANTENNA
VIDEO IN AUDIO IN
R L
VIDEO OUT AUDIO OUT
®
receiver. See
CABLE
OR