Related Manuals for Kärcher 1.009-102.0
Summary of Contents for Kärcher 1.009-102.0
- Page 1 Floor Polisher Operator Manual Models: 1.009-102.0 BDS 43/175 C 115V 1.009-103.0 BDS 51/175 C 115V 8.645-047.0-A 12/3/21...
- Page 2 FOR YOUR SAFETY DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Record This Important Information Date of Purchase Purchased From Address City State Phone Contact Machine Model Machine Serial Number Important Phone Numbers Medical Emergency...
-
Page 3: Table Of Contents
Table of Contents Safety Precautions..............4 How to Operate the Machine..........10 Technical Specifications............5 Installing the Pad Driver...........10 Operator Responsibility............6 Operation..........10 Machine Preparation............6 After Use...............10 Unpacking the Machine..........6 Scheduled Maintenance............12 Transporting the Machine........6 Machine Troubleshooting..........13 Grounding Instructions..........7 Extension Cords.............7 Machine Components............8 Operator Handle Grips.........9 Switch Levers............ -
Page 4: Safety Precautions
Safety Precautions unauthorized modification or alteration to this machine voids all Anyone operating the machine should read the warranties. following carefully and be informed of potentially dangerous operating conditions. Operators should WARNING! Electrical components of this machine can “short-out” if be familiar with the location and use of all safety exposed to water or moisture. -
Page 5: Technical Specifications
Technical Specifications: Description BDS 43/175 C BDS 51/175 C Voltage (V) Frequency (Hz) Current (A) Pad / Brush Speed 175 rpm 175 rpm Power 1.5 hp (1.1 kW) 1.5 hp (1.1 kW) Gearbox 3-Planet 3-Planet Pad/Brush Size 17” (43 cm) 20”... -
Page 6: Operator Responsibility
This Machine is Manufactured for Figure 1 Commercial use only. This machine is designed and manufactured for indoor use on hard floor surfaces. Karcher does not recommend use of this machine in any environment other than an indoor environment. This floor machine is designed and manufactured for commercial floor use only. -
Page 7: Grounding Instructions
Grounding Instructions WARNING: To prevent possible electric shock, protect 120 Volt Machines the machine from rain. Keep the machine in a dry This product must be grounded while in use to protect building. the operator from electrical shock. The machine is WARNING: To prevent possible electric shock, always provided with a three-conductor cord and a three contact use a 3-wire electrical system connected to the electrical... -
Page 8: Machine Components
Machine Components Operator Handle Grips Switch Levers Switch Lever Safety Lock Cord Hook Water Release Handle Handle Release Lever Power Cord... -
Page 9: Operator Handle Grips
Operator Handle Grips Handle Release Lever Use the operator handle grips to operate and move This handle is used to release or lock the operators the machine. The switch levers on the underside of handle. Pulling up on the lever will allow the handle to the handle grips, turn the motor on and off. -
Page 10: How To Operate The Machine
How to Operate the Machine WARNING! Be prepared to control the machine as Installing the Pad Driver soon as the motor starts. Just a slight up or down movement of the operators handle (7) will make the WARNING! Drain the water from the tank before machine move from side to side. - Page 11 Figure 5...
-
Page 12: Scheduled Maintenance
Scheduled Maintenance Interval Operation Every 6 Daily Weekly Monthly Months Remove driver/pad holder Check for loose or lost fasteners Inspect hoses and connections Inspect driver / pad holder for damage Clean the machine and accessories Check the power cord for damage Check machine wiring for fray or cut Check the carbon brushes of motor These items must be performed with the proper tools and training. -
Page 13: Machine Troubleshooting
Machine Troubleshooting Problem Possible Cause Solution Check the main power supply (building circuit breaker). No power Check the cord connection at the wall outlet Switch lever safety lock not depressed Hold in the switch lever safety lock and then engage switch levers. Machine will not start Bad connection Check the motor and cord interlock connections. - Page 16 THANK YOU! DANKE! MERCI! GRACIAS! Register your product and benefit from many advantages. Enregistrez votre produit et bénéficiez de nombreux avantages. Registre su producto y aproveche de muchas ventajas. Registrieren Sie Ihr Prudukt und Sie von vielen Vorteilen. www.kaercher.com/welcome Rate your product and tell us your opinion. Évaluez votre produit et donnez-nous votre opinion.