Table of Contents
Advertisement
14. Pull off front cover of the switch box, remove
remote control and spare grommets, and
push front cover back on.
15. Mount switch bracket on the stand, as shown
in Figure 15, with (2)
(4)
⁄
" flat washers, and (2)
3
8
Figure 15. Switch bracket mounted to stand.
16. Secure vacuum hose inside upper and lower
stand legs with (2) U-shaped clips (see
Figure 16).
Figure 16. Securing vacuum hose to stand legs.
Model G0441HEP (Mfd. Since 01/15)
⁄
"-16 x
⁄
" hex bolts,
3
3
8
4
⁄
"-16 lock nuts.
3
8
x 2
U-Shaped
Clips
16. Follow assembly instruction Steps 10 in own-
ers manual.
17. Attach rubber gasket to top of HEPA filter
housing (see Figure 17), then secure filter
adapter to housing using (8)
bolts and (8)
⁄
" flat washers.
5
16
Rubber
Gasket
Figure 17. Attaching filter adapter to filter
housing.
18. Attach rubber gasket to blower housing (see
Figure 18), then secure HEPA filter assem-
bly using (8)
⁄
"-16 x 1" hex bolts, (8)
3
8
nuts and (16)
⁄
" flat washers.
3
8
Rubber Gasket
Figure 18. Attaching HEPA filter assembly to
blower housing.
19. Follow assembly Steps 14–21 in Owner's
Manual to assemble collection drum.
⁄
"-18 x 1" hex
5
16
Filter Adapter
x 8
Filter
Housing
⁄
" hex
3
8
x 8
HEPA Filter
Assembly
-9-
Advertisement
Table of Contents
