Table of Contents
Advertisement
Electrical connection
Water supply pressure
Water supply
Capacity
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to
decrease energy consumption.
14. INSTALLATION
14.1 Fitting under a counter
The plinth of a freestanding appliance is
not adjustable. Do not remove the work-
top if you want to use the appliance as a
freestanding unit.
It is not necessary to remove the work-
top when installing under a standard
kitchen counter. Only remove the work-
top when installing the appliance under a
close fitting sink unit or kitchen counter
(820 mm).
Put the appliance adjacent to a water tap
and a water drain.
Make sure that the dimensions of the
recess agree with the dimensions in the
picture.
min 570 mm
820 mm
600 mm
Removing the work-top
1. Remove the rear screws (1).
Voltage (V)
1)
Frequency (Hz)
Wattage (W)
bar (minimum and maximum)
kPa (minimum and maximum)
Cold water or hot water
Place settings
200 - 240
50 / 60
1550-2200
0.5 - 8
50 - 800
max 60 °C
2)
15
1
2. Pull the work-top from behind (2).
3. Lift the work-top and move it from
the front slots (3/4).
3
4. Level the appliance using the
adjustable feet.
5. Install the appliance under the
kitchen counter.
ENGLISH
21
2
4
Advertisement
Table of Contents
