RCA RP-6150 User Manual page 5

F T
IRST HINGS
• If you do not intend to use the unit for a month
or more, remove the batteries to avoid leakage
or subsequent damage.
• Dispose of batteries in the proper manner,
according to federal, state and local regulations.
• Any battery may leak electrolyte if mixed with a
different battery type; if inserted incorrectly; if
all batteries are not replaced at the same time; if
disposed of in fire; or if an attempt is made to
charge a battery not intended to be recharged.
• Discard leaky batteries immediately to avoid
possible skin burns or other personal injury.
U A
SING DAPTERS
This scanner is equipped with two jacks - PWR and
CHG. When an adapter is connected to the PWR
jack and an AC outlet, power from the batteries is
disconnected.
When an adapter is connected to the CHG jack, this
jack will provide power for the scanner while
recharging the batteries.
WARNING: Use the CHG jack only if you have
rechargeable nickel-cadmium batteries installed. DO
NOT CONNECT AN AC OR DC ADAPTER TO THE CHG
JACK IF YOU HAVE NON-RECHARGEABLE BATTERIES
INSTALLED. If you try to recharge non-rechargeable
batteries, you may cause serious injury to yourself and/
or severely damage the scanner.
AC P
OWER
To use the AC adapter provided, simply plug the
barrel end into the PWR jack on the side of your
scanner and the pronged module into a standard
AC outlet.
F
IRST
5