RCA RP-6150 User Manual page 13

U
SING THE
3. Press the LIMIT button. Hi will appear in the
display.
4. Key in the highest frequency in the search
range and then press the ENTER button.
5. Choose the direction you want to search in (
or ) and press the appropriate button. -L- and
SRCH will appear in the display and an indicator
will flash beneath the next available monitor
memory.
NOTE: When the scanner has exhausted the
search range, it will begin again.
D
IRECT SEARCH
In this mode, the scanner begins at a specified
frequency and scans up or down.
1. Press the MANUAL or PGM button to enter the
specific frequency.
If starting from a stored channel, press the
MANUAL or PGM button, enter the specific
channel number and then press the MANUAL or
PGM button again.
2. Press either ^ or V buttons to begin the search
in the direction of your choice. - d- and SRCH will
appear in the display and an indicator will flash
beneath the next available monitor memory.
NOTE: When the scanner has exhausted the
search range, it will begin again.
T
EMPORARILY
Your scanner has 10 temporary memory locations,
called monitor memories, where you can hold
active frequencies found during a search that you
or may not choose to later store in a permanent
channel.
S
CANNER
S A
AVING CTIVE
F
REQUENCIES
13