Usb Operation - Roadstar HIF-1993D+BT User Manual

5 English
4. Release the [TONEARM CLAMP] (29), and remove the stylus protector;
5. Lift up the [TONEARM] (28) with the [LIFT LEVER] (30);
6. Move the [TONEARM] (28) to the beginning of the record;
7. Lift down the [TONEARM] (28) with the [LIFT LEVER] (30);
8. When the record is finished the [TONEARM] (28) will automatically return to the
rest support and the [PLATE] (26) will stop turning. To stop manually, lift up the to-
tonearm from the record and return it to the rest support.
Note: Do not stop or turn the [PLATE] (26) manually.
When the unit is moved or transported:
Lock the [TONEARM] (28) with the [TONEARM CLAMP] (29);
•
Place the protective cap on the stylus (even when not in use);
•
Screw the [TRANSPORT SCREW] (27) counterclockwise until you feel resistan-
•
ce (do not screw it completely).
CD-MP3 OPERATION
1. Select "CD" mode by pressing repeatedly the [FUNCTION] button (4);
2. Press [OPEN/CLOSE] (18) to
label up in the CD compartment.
3. Close the [CD DOOR]
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (14);
2. Press [PLAY MODE] (17), the display (6) will show "P01" and flash;
3. Select desired track by using [SKIP -/+] buttons (15/16);
4. Press [PLAY MODE] (17) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (13) to play
the disc in the order you have programmed.
Note: Press [STOP] (14) twice to terminate programmed play.

USB OPERATION

1. Select "USB" mode by pressing repeatedly the [FUNCTION] button (4);
2. Plug an USB stick (max. 32GB) into the [USB PORT] (1);
3. Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a maul-
•
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
•
The USB port is not designed for charging smartphones or other devices.
•
open the [CD DOOR]
(12). Focus search is performed and playback will start
(12) and place a CD with the