Fm & Fm-Stereo Reception; Turntable Operation - Roadstar HIF-1850TUMPK Instruction Manual

FM & FM-STEREO RECEPTION
• Stereo reception is possible when the tuned FM station is broadcasting in stereo.
• When in FM Stereo mode and the station is broadscasting in Stereo, the STEREO indicator
(19) lights up.

TURNTABLE OPERATION

Preparation
Release the Tonearm Clamp, and remove the stylus protector.
Listening to Records
1. Select the PHONO button (6) to select the TURNTABLE function.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
central spindle when playing 17cm EP records.
3. Set the Speed Selector (24) to 33 / 78 or 45 rpm according to the record.
4. Lift the Tonearm with the hand.
5. Move the tonearm to the beginning of the record, or to the start of a particular track.
6. Gently lower the tone arm onto the record to start playing.
7. To stop manually, lift the tonearm from the record and return it to the rest.
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tonearm clamp could result in damage to the
Tonearm. Replace the protective cap on the stylus when not in use.
WARNING: This appliance is equipped with two spare replacement stylus that could be replaced
in the event if the one originally fitted in series will be worn or damaged.
To replace the stylus, carefully remove the old one and gently insert the new paying attention.
English
5
PLAYING COMPACT DISC

1.
WARNING: This appliance is equipped with two replacement stylus that potrenno be replaced
To replace, carefully remove the old and gently insert the new paying attention.
2.
3.
4.

1.

1.
2.
3.
4.
5.
English
6
To start
Move the function selector (6) to select " CD/USB" mode.
in the event of the series is usurasse too.
Press "OPEN/CLOSE" button (11) to open the cd door (10).
Place a cd with the printed side facing up inside the tray & then close the co door.
focus search is performing, the first track will start playback.
Playback / Pause / Stop
To interrupt, press the " STOP " button (32) once, the total number of tracks compare on
the lcd display (18). press again PLAY/PAUSE to resume normal playback.
Skip/search mode (skip/search up
During play or pause mode, if "skip up" button (3) is pressed. it will go to next track and
display the track no. and then remain the play or pause mode.
During play or pause mode, if "skip down" button (3) is pressed. it will go back to the
beginning of the track, original track no. is display and remain the play or pause mode.
After step 2, press "skip down" button (3) again will go to the previous track and remain the
play or pause mode.
if press and hold the " skip up/down button " (3) during cd/mp3 playabck, the playing track
will go fast forward or backward until the button being released.
To skip 10 tracks UP or DOWN press the TRACK+10 or TRACK-10 button on Remote
Control.
/ skip/search down )