First Things First; Powering Up; Resetting And Initializing - RCA RP-6200 User Manual

F T
IRST HINGS
P
OWERING
Your scanner has an external jack. Plug in the AC adapter supplied by inserting
the barrel end into the DC 12V jack on the back of the unit.
NOTE: The provided adapter supplies 12 volts DC power (300 milliamperes)
with a center positive plug. Should you decide to use an adapter other than
the one provided, please make sure it meets the above specifications. Failure
to do so may cause a safety hazard or damage the unit.
Your scanner has a memory backup that begins to
work moments after plugging in the adapter. Stored
information will be stored for approximately 1 hour
after the removal of power for any reason.
R
ESETTING AND
When connecting your scanner to its power source, the
display may lock up or show erroneous messages.
These situations are simply and easily fixed by
resetting the scanner.
To reset:
1. Make sure the scanner is ON.
2. Press the RESET button on the back of
the scanner with a pointed object,
such as a paper clip.
If the above steps fail to reset your
scanner, it is possible you will have
to re-initialize the unit. Do this only
if you are sure resetting the scanner
has not worked. Initializing the scanner
clears all stored information from
the unit's memory.
2
F
IRST
U
P
I
NITIALIZING