Table of Contents
Advertisement
Installing the DVD Map Disc
Your dealer/retailer may have installed the map DVD.
If the map DVD was not installed, do the following
to load it:
Read the following steps completely before operating
this feature.
1. Turn the ignition on.
2. Load the map DVD into the slot, located just
below the navigation system screen, by inserting
it partially until the system pulls it in.
Once the map DVD is inserted correctly, you will
have the following two choices:
I agree: Touch this screen button to proceed to
the navigation system.
^
(Language): Touch this screen button to
change the language of the navigation system,
Driver Information Center (DIC), Head-Up Display
(HUD), etc. See "Language" under Personalization
on page 5-2 for more information.
Once a language has been selected, touch I agree
to enter the navigation system. The map will appear
showing your current vehicle position.
2-6
DVD Map Disc Messages
If an error appears on the display and/or the map disc
comes out, it could be for one of the following reasons:
•
If the map disc was installed into the CD slot.
See "Installing the DVD Map Disc" previously.
•
It is very hot, when the temperature returns to
normal, the map disc should play.
•
You are driving on a very rough road. When the
road becomes smoother, the map disc should play.
•
The map disc is dirty, scratched, wet,
or upside down.
If any error occurs repeatedly or if an error cannot
be corrected, contact your dealer/retailer.
Ejecting the DVD Map Disc
When the DVD map disc is not loaded, you will not
be able to use the navigation portion of the system.
Z
(Map DVD Eject): Press the eject key, located
next to the map DVD loading slot, to eject the map disc.
Pull the disc out. The map DVD slot is the slot directly
below the display screen.
Advertisement
Table of Contents
