Cadillac STS-V 2008 Manual page 12

Setting the Region, Entering an
Address and Point of Interest,
and Storing a Home Destination
and Preset Destinations
Before entering an Address, Point of Interest, Home,
or Preset Destination, select the appropriate region
that contains the final destination. Your vehicle must
be stopped to perform this operation.
Setting the Region
To set the region, do the following:
1. Press the power/volume knob to turn the
system on.
2. Insert the DVD map disc. See "Installing the Map
DVD" under Maps on page 2-4 for more information.
A notice may appear. Touch the I agree screen
button to proceed.
3. Press the ROUTE hard key.
4. Press the Region screen button.
5. Select the appropriate region numbered screen
button that contains your final destination.
The system will return to the DESTINATION ENTRY
screen. See "Region" under Destination on page 2-40
for more information.
1-8
Entering an Address
To set a destination by entering a street address,
do the following:
1. Press the power/volume knob to turn the
system on.
2. Insert the DVD map disc. See "Installing the Map
DVD" under Maps on page 2-4 for more information.
A notice may appear. Touch the I agree screen
button to proceed.
3. Press the ROUTE hard key. Verify that the selected
Region is correct.
C
4. Press the Address screen button.
5. Enter the street name using the alpha keypad on
the screen.
Do not enter directional information or street type,
and use the space symbol screen button (
between street or city names. For example, the
street name N. Royal Oak Rd. should be entered as
U
royal oak. Use the backspace (
button if an incorrect character has been entered.
6. Select the desired street name with the correct
designation (Dr., Ln., St., etc.) from the list.
U
)
V
) screen