Final Checks; Final Fitting; Customer Care - Rangemaster Infusion 110 Induction User's Manual & Installation Instructions

Fig. 8.13
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
Fig. 8.14
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth xing screw
Inner plinth
INSTALLATION
Check the appliance is electrically safe when you have finished.
Outer plinth

Final Checks

Hotplate Check
Check each burner in turn (refer to the 'Hotplate Burners'
section at the front of the instructions).
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier in the instructions, and then
turn on the ovens. Check that the oven fans start to turn and
that the ovens start to heat up.
NOTE: The oven light bulb is not included in the guarantee.
Turn off the oven.

Final Fitting

Fitting the 2-piece Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (Fig. 8.13).
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (Fig. 8.14).

Customer Care

Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
31