Manual Control
This interface is used to control the current fixture and automatically enters the master
state (does not receive the DMX signal and sends a DMX signal to the slave).
Option
1. Pan
2. Pan Fine
3. Tilt
4. Tilt Fine
5. Pan-Tilt Speed
6. Dimmer
7. Shutter/Strobe
8. Color
9. Gobo
10. Gobo 1
11. Gobo1 RT
12. Prism
13. Focus
14. Reset
System
Option
Lamp Temp
DMX Monitor
Description
0-255
0-255
0-255
0-255
0-255
Orange indicates selected, Press
"OK" key enter into Edit status,
0-255
then press "UP" "DOWN" to
0-255
select, press "OK" save and Exit
0-255
edit status.
0-255
0-255
0-255
0-255
0-255
Press "OK" to see the confirmation
dialog box, press "OK" again to
enter the reset interface, all motor
reset
Description
Enters to sub-interface and displays
the channel values as values for
viewing.
6