Table of Contents
Advertisement
Quick Links
CipherTrust Manager k160
Quick Start Guide
This document details quick instructions for starting up and configuring a Thales Trusted Cyber Technologies (TCT) CipherTrust Manager
k160 appliance. Full documentation is located here: https://www.thalesdocs.com/ctp/cm/latest/get_started/deployment/index.html.
Required Equipment
•
Power supply and cable
•
Serial-to-USB adapter cable
•
Null Modem cable
•
(2) Mounting brackets with screws
WARNING: To avoid inadvertently locking the token HSM, wait to insert the first USB token HSM until ready to proceed with the "Perform
the HSM Setup" instructions below.
Front of Unit
Item
Name
Description
A
Power
Powers the appliance on or off.
On/Off
B
Round
Reserved for future use.
Button 1
C
Round
Reserved for future use.
Button 2
D
USB Token
Standard or High Assurance.
HSM
(High Assurance token shown.)
Physical Installation
1.
Install the CipherTrust k160 in an appropriate mounting rack
that provides sufficient space front, side, and back for cabling,
airflow, and maintenance.
2.
Connect the provided Null Modem cable to the COM port (E).
If your computer does not have a serial port, use the provided
Serial-to-USB adapter cable.
NOTE: If the adapter is not recognized by your computer, you
may need to install a USB driver. Contact TCT Technical
Support for assistance.
04/30/2023
Thales Trusted Cyber Technologies, Proprietary
•
KeySecure k160 Appliance
•
(2) USB Tokens (Standard or High Assurance)
•
USB Extender Cable (High Assurance)
•
Ethernet cable (not included)
Back of Unit
Item
Name
Description
E
(COM)
Connect a terminal to this port using
Console Port
the included DB9 to USB cable.
F
DC 12V
Power Adaptor connection.
G
VGA
Connect a standard VGA monitor.
H
USB ports
Used to register additional tokens.
I
LAN
CAT5 Networking Port.
3.
Insert an Ethernet cable into the LAN port (I) and connect the
other end to the network.
4.
Insert the power cable into the DC 12V (F) and then plug to
an AC power source. The CipherTrust k160 will power up
automatically.
5.
Press the power button (A) to turn off.
CipherTrust Manager k160
Quick Start Guide
007-500223-001, Rev. E
1
Advertisement
Table of Contents
Related Manuals for Thales CipherTrust Manager k160
Summary of Contents for Thales CipherTrust Manager k160
- Page 1 Quick Start Guide 007-500223-001, Rev. E CipherTrust Manager k160 Quick Start Guide This document details quick instructions for starting up and configuring a Thales Trusted Cyber Technologies (TCT) CipherTrust Manager k160 appliance. Full documentation is located here: https://www.thalesdocs.com/ctp/cm/latest/get_started/deployment/index.html. Required Equipment •...
- Page 2 NOTE: See, “CipherTrust Manager > Getting Started > CipherTrust Manager Deployment > Network Configuration Log in again using this new password. The CipherTrust Tutorial” in the full product documentation. Manager Web Page appears. [Optional] Close the serial connection. 04/30/2023 Thales Trusted Cyber Technologies, Proprietary...
- Page 3 Once a registered token HSM is provided, the system will start back up and resume operations. • Stored objects can only be recovered by reintroducing a registered token HSM or by performing a system reset and restoring from a backup. 04/30/2023 Thales Trusted Cyber Technologies, Proprietary...
- Page 4 If performing initial configuration, wait to insert the HA Token HSM until ready to proceed with the “Perform the HSM Setup." HA Token HSM lights up red immediately after Contact Thales TCT Technical Support. being inserted. 04/30/2023 Thales Trusted Cyber Technologies, Proprietary...
Need help?
Do you have a question about the CipherTrust Manager k160 and is the answer not in the manual?
Questions and answers