Table of Contents
Advertisement
Cleaning and Maintenance
Removal of the Oven Door
Before cleaning the oven door glass, you must remove the oven door, as shown below:
Removal of the Side Wire Rack
a
Changing the Oven Lamp
WARNING: The maintenance of this appliance should be carried out by an authorised service
person or qualified technician only
WARNING: Switch off the appliance and allow it to cool before cleaning your appliance.
•
Remove the glass lens and then remove the bulb.
•
Insert the new bulb (resistant to 300 °C) to replace the bulb that you removed (230 V, 15-25 Watt,
Type E14).
•
Replace the glass lens, and your oven is ready for use.
The lamp is designed specifically for use in household cooking appliances. It is not suitable for household
room illumination.
1. Open the oven door.
2. Open the locking catch (a) (with the aid of a
screwdriver) up to the end position.
3. Close the door until it almost reaches the fully
closed position and remove the door by
pulling it towards you.
To remove the wire rack, pull the wire rack as
shown in the figure. After releasing it from the clips,
lift it up (2) and pull back (1).
17
Advertisement
Table of Contents
