Danfoss 088U0211 Instructions Manual page 7

Cf-rp public (tamperproof) room thermostat

Hide thumbs Also See for 088U0211:

Available languages

Instruction CF-RP Public (Tamperproof) Room Thermostat

2. Installation

Note:

• To activate batteries in the Room Thermostat

please remove enclosed strips from the batteries

• The assignment of the Room Thermostats to the

Master Controller should be within 1½m distance

Activate Install mode on

Master Controller - fig. 1

• Use the menu selection button

Install mode. Install LED

• Activate Install mode by pressing OK

LED

goes ON

Activate Install mode on

Room Thermostat

• Press the push button

during communication

Select output on Master Controller

• All available output LEDs on Master Controller

light up, and the first of them flashes

• Press output selection button

output (flashes) and accept with OK

• All output LEDs

stays ON shortly

VI.UH.P1.52

go OFF. Selected output

Produced by Danfoss Floor Heating Hydronics 08.008

to select the

flashes

. LED

and

, select desired

. Install

flicker

Table of Contents