Mitsubishi Electric Mr.SLIM SEZ-KC25VA.W Technical & Service Manual page 16

7-4. THERMISTOR (Liquid piping temperature detection)
OPERATING PROCEDURE
1.Removing the thermistors.
(1) Remove the drainpan with procedure 7-3.
(2) Remove the bottom plate A (fixing screws : six), and remove
the plate.(Fig. 12)
(3) Remove the thermistors from the thermistor holders which
are installed on the piping.(Fig. 13)
(liquid piping : fine piping )
Be careful on removing heavy parts.
PHOTOS
fig.12
Bottom plate A
fig.13
16
Thermistor