Remote Buttons That Control Rca Vcrs - RCA F27703 User Manual

Remote Buttons That Control RCA VCRs

The digital remote control that came packed with your TV
controls your TV and up to two compatible RCA VCRs.
To control a compatible RCA VCR, first press the VCR1 or
VCR2•LD button to put the remote in the "VCR mode". The
buttons shown below will then control the VCR.
Selected models of RCA VCRs have a switch that lets you
determine which VCR will be controlled by the VCR1 button,
VCR
2
REW
REC
DISPLAY
MUTE
1 2
4 5
7 8
INPUT
0
CLEAR
—
•
(
Notes:
• The six VCR buttons grouped together (PLAY, PAUSE, STOP,
REWIND, FF, and RECORD) control the VCR even if the remote is in
the "TV Mode".
• The ANT, MENU•PROG, CLEAR, and DISPLAY buttons are for RCA
VCRs only.
30
¥
LD AUDIO
PLAY FF
STOP PAUSE
SKIP
PREV CH
3
6
9
ANTENNA
•
RESET
+
MOVE
) SRS
and which VCR by the VCR2•LD button. Other models have an
on-screen menu that lets you determine if it will be controlled by
VCR1 or VCR2•LD. Additional information about controlling
two RCA VCRs is in the note on the next page.
If you have another brand of VCR, you can probably also
program your remote to control it. Details are on the next page.
VCR1 and VCR2 Buttons
• Press to turn on VCR and put remote in "VCR Mode".
• Press the TV button to put remote back into "TV Mode".
POWER Button
Press to turn off VCR.
REW (Rewind) Button
• Press while VCR is stopped to rewind tape.
• Press while VCR is playing to search backward.
PLAY Button
Press to start tape playing.
FF (Fast Forward) Button
• Press while VCR is stopped to fast forward tape.
• Press while VCR is playing to search forward.
REC (Record) Button
Press to record.
STOP Button
Press to stop whatever VCR is doing: Playing, Recording,
Rewinding, or Fast Forwarding.
PAUSE Button
• Press to pause play or record mode.
• Press again to release pause.
DISPLAY Button
Press to bring VCR's displays to TV screen.
CHAN (Channel) Buttons
Press to select the next higher or lower channel in VCR channel
memory.
Number Buttons
• Press two numbers to select channel.
• Press a "0" before a single-digit channel number.
CLEAR Button
Used when setting the VCR's clock and timer.
MENU•PROG Button
Used when setting the clock and programming the timer.
ANT (Antenna) Button
Same as VCR or TV/VCR button on front of VCR.