Video Menu- General Instructions - RCA F27703 User Manual

VIDEO MENU – General Instructions
1.
Repeatedly press MENU•PROG to select VIDEO MENU
and then press + or – to display the video menu.
Mute
Video Menu
Audio Menu
Setup Menu
2.
Repeatedly
press
MENU•
PROG to
Color
select
Tint
function,
Contrast –..............l......+
then press + Bright
Sharp
or – to
adjust it.
Picture Reset
The video menu will automatically disappear from the screen if
you do not press + or – within a few seconds.
Via remote control, your TV will "remember" which function
you displayed last–even after the menu has disappeared from
the screen. So, if you want to adjust the same function again,
simply press the + or – button on the remote control. The last
function you adjusted will reappear on the TV screen.
Custom Picture Memory for Input Channels
The channel numbers you select to see signals from components
(like a VCR) that are connected to the INPUT jacks on the back
of the TV are called input channels. Selecting channel 90 lets
you see the signal coming from whatever component is attached
to the S-VIDEO connector, channel 91 lets you see the signal
from the INPUT 1 jacks, and channel 92 lets you see the signal
from the INPUT 2 jacks. Your TV is equipped with a custom
picture memory for these input channels. When the TV is tuned
to one of these channels (90, 91, 92), you can change the picture
settings for that component's signal as desired without changing
the settings of any other channel. This is very useful because
you'll be able to adjust for the best picture from each of your
components and the TV will remember those settings
automatically the next time you tune that input channel.
10
–..........l..........+
–.......l.............+
–.........l...........+
–.............l.......+
The COLOR function adjusts the amount of color in the picture.
Press + to increase color or press – to decrease color.
The TINT function adjusts the color of flesh tones. Press + to add
more red tint, or press – to add more green tint.
The CONTRAST function adjusts the overall brightness and contrast
of the picture. Press + to increase contrast, or press – to decrease
contrast.
The BRIGHTNESS function adjusts the brightness of the dark
portions of the picture. Press + to increase brightness, or press – to
decrease brightness.
The SHARPNESS function adjusts picture sharpness. Press + to
increase sharpness, or press – to decrease sharpness.
The PICTURE RESET function lets you quickly change all the
video functions (shown above) back to the factory settings. Press
either + or – to reset the video functions, or use the RESET button
on the remote.