Table of Contents
Advertisement
Setup and Connections
Advanced Connections
Advanced connections give you better sound and video by separating
the audio and video signals and enabling you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
Back of the TV
The diagram below describes each of the back panel jacks. When
connecting A/V cables, be sure to connect corresponding OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
VIDEO and Audio Inputs
Connect any one of the following components:
• VCR
• Laserdisc Player
• Satellite Receiver
To view the component connected to VIDEO,
use the WHO•INPUT button on the remote.
VCR Control
Connect the GUIDE Plus+
system IR controller for
one-button recording
and channel tuning from
the GUIDE Plus+ system.
* These features are not available in models F25625 and F27625.
6
• Internet Access Device
• DVD Player
AUDIO
VIDEO
L / MONO
R
R
L
VCR
CONTROL
* S-Video
This optional
connection can
be used for
better video
quality picture.
Once you have made your connections
you will need to program the TV to tune
to the correct Video INPUT channel in
order to see and hear audio and video
from the component. You will program
this later in the Interactive Setup.
* Audio Outputs
Connect to an audio receiver or
amplifier for variable controlled
or fixed level stereo output.
IN
OUT
CABLE/
ANTENNA
S-VIDEO
Cable/Antenna
Takes the signal input from a cable,
cable box, or an off-air antenna. Can also
be used for basic component connections.
Advertisement
Table of Contents
