1886
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades
Put the blade washers found in the
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Repeat x3
Hanging Fan
Wiring
Insert the two canopy screws
found in the
Hunter Pro Tip:
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
hardware
Canopy
Blades
hardware bag.
bag
Blade Screw
bag
Blade Washer
bag
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Light
Bulbs/Glass
Remote
x2
Canopy Screw
x9
x9
Remote Cradle