Tv + Vcr + Satellite Receiver - RCA CR29TF420 User Manual

TV + VCR + Satellite Receiver

1. Connect your Satellite Receiver to your TV
A. Connect the white and red audio cables to the AV1 L and R audio input jacks on the back of the
B. Connect an S-Video cable (not supplied) to the S-VHS jack on the back of the TV and to the
2. Connect coaxial cables to your Satellite Receiver
A. Connect the coaxial cable from your cable outlet, cable box, or antenna to the input jack on your
B. Connect the coaxial cable from your satellite dish antenna to the input jack on your satellite
3. Connect your Satellite Receiver to your VCR and TV
A. Connect a coaxial cable to the output jack (sometimes labeled OUT TO TV) on the satellite
B. Connect a coaxial cable to the output jack on the VCR (sometimes labeled OUT TO TV) and to the
4. Connect your VCR to your TV
A. Connect the white and red audio cables to the AV2 L and R audio input jacks on the back of the
B. Connect the video cable (yellow) to the AV2 VIDEO input jack on the back of the TV and to the
Chapter 1
2A
From Cable,
Cable Box,
or Antenna
2B
Satellite Signal
TV and to the audio output jacks on the satellite receiver.
S-Video output jack on the satellite receiver.
Note: If your satellite receiver does not have an S-Video jack, use a regular video cable to
connect the satellite receiver's video output to the TV's AV1 VIDEO jack.
satellite receiver (sometimes labeled IN FROM ANT).
receiver (sometimes labeled SATELLITE IN).
receiver and to the input jack on the VCR (sometimes labeled IN FROM ANT).
ANTENNA jack on the TV.
TV and to the corresponding audio output jacks on the VCR.
video output jack on the VCR.
Connections & Setup
SATELLITE RECEIVER
IN FROM ANT
SATELLITE OUT TO TV
IN
S-VIDEO VIDEO
1B
VCR
3A
IN FROM ANT VIDEO
OUT TO TV
TV (back panel)
INPUTS
ANTENNA
3B
75 OHMS
CH3
OUT
CH4
R L
AUDIO
CH3
OUT
CH4
R L
IN
L
R
4A
4B
AV1 AV2
AUDIO
VIDEO
OUT
L
S-VHS
(MONO)
R
1A
Go to page 10
7