Whirlpool ADN 201/1 Instruction Manual page 9

DO NOT use detergents containing abrasive particles, acid, alcohol or benzene for cleaning
•
the appliance inner and outer surfaces. DO NOT use for cleaning cloths or sponges that
have coarse surfaces intended for scrubbing. Outer of the doors – glass – clean with
agents intended for glass cleaning.
IF THE APPLIANCE IS TO BE LEFT SWITCHED OFF FOR AN EXTENDED PERIOD, LEAVE ITS
•
DOORS OPEN.
Remarks on the appliance operating noise. As the appliance operates and goes
through the freezing cycle, various noises will be emitted. This is normal and is not a
sign of any malfunction.
As the refrigerant circulates around the refrigeration system, it causes sounds like
•
murmuring, bubbling, or rustling. Louder sounds like popping
short time as the refrigerator compressor switches on.
OPERATION PROBLEMS AND THEIR SOLUTIONS
(TROUBLESHOOTING). What if ...
The appliance is plugged in to the mains but it does not work and the electricity
•
supply voltage indicator is not illuminated. Check that your house electricity supply
installations are in order. Check that the plug is correctly inserted into the electricity
supply socket.
The noise has become louder. Check that the appliance is standing stable, on a level
•
place. To make it level, regulate the front feet. Check if the appliance is not touching any
furniture, and that no part of the refrigeration system at the back part of the appliance
body is touching the wall. Pull the appliance away from any furniture or walls. Check that
the cause of increased noise isn't due to bottles, cans in the appliance that might be
touching each other.
Water has appeared at the bottom of the refrigerator compartment.
•
whether a thaw water channel space isn't blocked. Clean the thaw water channel space
with a cleaner intended for that purpose.
Water has appeared under the appliance. The thaw water collection tray has slipped
•
off the compressor. Place the tray on top of the compressor.
When the appliance door is opened, the rubber sealing gasket pulls out. The
•
gasket is smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the
groove for it with warm water containing soap or dishwashing detergent and wipe dry.
Put the rubber sealing gasket back into the place.
High temperature in appliance, the compressor operation pauses are short.
•
Ascertain whether the appliance door/doors are shutting tightly, whether the door wasn't
kept open longer than necessary when taking out or putting in foodstuffs or whether a
large amount of warm food was placed in the appliance.
The top of the appliance has condensation on it. The ambient relative air humidity is
•
above 60 %. Ventilate the room where the appliance stands and if possible remove the
cause of the humidity.
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY THE
CAUSE OF THE FAULTY FUNCTIONING OF THE APPLIANCE YOURSELF. If you cannot solve the
problem yourself, contact the nearest refrigerator service representative by telephone or in writing.
When making contact necessarily indicate the refrigerator model and number. You will find this
data on the product label, which is glued to the wall of the refrigerator compartment.
WARRANTY SERVICE
8
or clicking may be heard for a
Check