Mitsubishi Electric Mr.Slim PCA-M35KA2 Service Manual page 56

Pattern 2
4. Toggle through the pages with the F3 or F4 button.
5. Select the mode number with the F1 or F2 button, and then press the [
button.
6. Select the setting number with the F1 or F2 button.
Setting range for modes 1 through 28: 1 through 3
Setting range for modes 31 through 66: 1 through 15
7. When the settings are completed, press the [
data from the remote controller to the indoor units.
8. When the transmission is successfully completed, the screen will return to the
Function setting screen.
Note:
• Refer to the indoor unit Installation Manual for the detailed information about
initial settings, mode numbers, and setting numbers for the indoor units.
• Be sure to write down the settings for all functions if any of the initial settings
has been changed after the completion of installation work.
OCH752
] button to send the setting
56
Function setting
Ref. address
Mode 1
1
Mode 2
1
Mode 3
1
]
Mode 4
1
Save:
Cursor
Function setting
Ref. address
Mode 1
1
Mode 2
1
Mode 3
1
Mode 4
1
Request:
Value
F1 F2
Grp. (1/8)
Page
Grp. (1/8)
F3 F4