Playback Procedure - RCA 27F501TDV User Manual

Tv/vcr/dvd

Hide thumbs Also See for 27F501TDV:

Technical specifications (2 pages)

Table Of Contents

Table of Contents

NOTES:

• If a non-compatible disc is loaded, "Incor-

rect Disc", "Region Code Error" or "Paren-

tal Error" will appear on the TV screen ac-

cording to the type of loaded disc. If these

appear, check your disc again (see pages

44 and 60).

• Some discs may take a minute or so to

start playback.

• A "Prohibition" symbol

the upper left of the screen. This symbol

means either the feature you tried is not

available on the disc, or the TV/VCR/DVD

can not access the feature at this time. This

does not indicate a problem with the TV/

VCR/DVD.

• When you set a single-faced disc label

downwards (ie. the wrong way up) and

press PLAY or OPEN/CLOSE on the TV/

VCR/DVD, "Reading" will appear on the

display for about 6 seconds and then "No

Disc" or "Incorrect Disc" will be displayed.

• Some playback operations of DVDs may

be intentionally fixed by software produc-

ers. Since this TV/VCR/DVD plays DVDs

according to the disc contents the software

producers designed, some playback fea-

tures may not be available. Also refer to

the instructions supplied with the DVDs.

5L00101AE(43-48)

Press DVD to select DVD

mode. Press OPEN/

CLOSE on the TV/VCR/

DVD or the remote

control.

The disc tray will open.

Place a disc onto the tray.

Position it with the printed

label side up, align it with

the guides, and place it in

its proper position.

Press OPEN/CLOSE or

1 (PLAY).

The disc tray closes auto-

matically.

On the TV-screen,

changes to "Reading" and

then playback commences.

• A menu screen will ap-

Press STOP to end playback.

• The TV/VCR/DVD memorizes the stopped point, depend-

• If you press STOP again or unload the disc ("

may appear at

Press OPEN/CLOSE.

The disc tray opens.

Remove the disc and press OPEN/CLOSE then press

POWER.

The disc tray closes automatically and TV/VCR/DVD turns

off.