JUKI APW-896N/IP-420 Basic Operation Manual page 33

When there is no material on the clamp foot, press CLAMP FOOT BACK button
foot moves to the back with the flap presser closed. At the same time, the confirming screen is released
and the screen returns to the sewing screen.
When canceling clamp foot back, press CANCEL button
the clamp foot does not move to the back. At the same time, the confirming screen is released and the
screen returns to the sewing screen.
When there is material on the clamp foot, be sure to press CANCEL button
the material.
Then depress back the pedal again to move the clamp foot to the back.
At this time, the error screen is displayed to inform that stop switch
is pressed. When RESET button
released and the screen returns to the input screen.
F
⑤ Depress back the pedal at the time of mounting the breast
H
box device.
At the time of mounting
pressing back the pedal in the green sewing screen (screen B),
the confirmation screen as shown on the left side is displayed.
When the clamp foot moves to the back by depressing back the
pedal, it retreats with the flap presser closed. This screen is to
confirm whether material is put on the clamp foot.
Confirming message saying that "Clamp foot moves to the back
G
with flap presser closed. Remove material on the clamp foot" is
displayed.
− 12 −
F is pressed, the error is
the breast box device, when de-
G and the clamp
H, and the flap presser is opened. Then
H and remove