Operating The Mower Blade-Control Switch (Pto); Operating The Throttle; Operating The Choke - Toro 75742TA Operator's Manual

Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Figure 12
Note:
Always engage the blades with the throttle in
the F position (Figure
AST
Figure 13
Disengaging the Blade-Control
Switch (PTO)
Figure 14
13).

Operating the Throttle

You can move the throttle control between the F
and S positions
LOW
Always use the F
g008945

Operating the Choke

Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch
Note:
Ensure that you fully engage the choke.
You may need to hold the knob up when you
use the key switch.
2. Push down the choke to disengage the choke
after the engine has started
g295538
g009174
1. O position
N
18
(Figure 15).
position when engaging the PTO.
AST
Figure 15
(Figure
(Figure
Figure 16
2. O position
FF
AST
g295539
16).
16).
g295540