Table of Contents
Advertisement
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the [FNC] button.
h Popup menu appears.
h
2
Touch [
].
h HOME screen appears.
h
3
Touch [
].
h SETUP screen appears.
h
4
Touch [Audio].
h Audio screen appears.
h
5
Touch [EQ / SW Level].
6
Touch the screen and set the Graphic
Equalizer as desired.
Gain level (area in dotted frame)
■
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust its
level by [R], [S].
[Preset Select]
■
Display the screen for selecting the preset
equalizer curve. (P.67)
■
[Memory]
Saves the adjusted equalizer curve as "User1"
to "User4". (P.67)
■
[Initialise]
Initialize (flatten) the current EQ curve.
[ALL SRC]
■
Apply the adjusted equalizer curve to all
sources. Touch [ALL SRC] and then touch
[OK] on the confirmation screen.
[Bass EXT] (Bass Extend Settings)
■
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).
[SW Level]
■
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
"None". See Speaker / X'over setup (P.64).
Ñ
Recall the EQ curve
1
Touch [Preset Select].
2
Select an EQ curve.
Ñ
Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
Controlling Audio
67
English
Advertisement
Table of Contents
