Loading Ir Data To Use This Unit As A Speaker Simulator - Boss ME-90 Reference Manual

Loading IR data to use this unit as a
speaker simulator
You can use the dedicated IR loader (software) to load IR (Impulse
Response) data into this unit for simulating speakers.
Download the dedicated IR loader from the BOSS website.
https://www .boss .info/support/
See "Using the ME-90 IR Loader" (Roland website) for how to load the
data.
You can select the speaker simulator by pressing the [1] [2] [3] [4]
pedals while holding down the [EDIT] button.
Pedal Display Speaker simulator
Uses the original speaker simulator built into the
[1] ME-90, which is tuned to each preamp type.
0
(Factory settings)
[2]
Uses the IR data loaded into USER 1.
1
[3] Uses the IR data loaded into USER 2.
2
[4]
Uses the IR data loaded into USER 3.
3
* IR data is not included in USER 1–3 with the factory settings.
MEMO
You can select and store the speaker simulator for each patch.
Connecting to your computer via USB
13