Turn the VCR On and Off
1. Press VCR to set the remote to
AUX
CABLE
VCR
TV
control the VCR. (Most RCA, GE
and ProScan models will only turn
0000
:
on when pressing VCR not
!,
OFF/ON).
:I
OFF/ON
2. Press OFF/ON to turn the VCR
on or off.
Watch a tape in your VCR
1. Turn on the VCR.
2. Insert a tape in the VCR.
3. Press PLAY to start the tape.
4. Press STOP when you are finished.
5. Press REW to rewind the tape.
6. Press PAUSE to pause the tape.
7. Press FF to fast forward the tape.
STOP
PAUSE
Record one channel and watch another.
1. Press VCR to set the remote to
AUX
CABLE
VCR
N
control the VCR.
0000
2. Tune the VCR to the channel
you want to record.
REC
3. Press REC to start recording.
4. Press TV/VCR.
5. Press TV to set the remote to
control the TV
6. Press CHANNEL
UP or DOWN to
change channels on the TV
CHAN
7. To see the channel you are recording,
tune the TV to channel 3 or 4
(same as CH3/4 switch on the VCR).
13