Table of Contents
Advertisement
FLUSH MOUNT INSTALLATION
For ease of installation there are two ways of fixing the tweeters in place.
The first requires the use of the metal ring provided. (See Figure A)
• After finding a suitable position for the tweeters place the cut out template for the tweeter in position
and mark around it.
• Before cutting the holes double check that no brake, fuel lines or wiring harnesses are likely to get
damaged.
• Ensure that the tweeter when fitted will not catch on any moving parts such as door / window handles.
• If mounting in a door check that the window can still be fully lowered before installing.
• Cut out the hole carefully.
• Place the entire tweeter into the cut out hole.
• From the back push the metal ring over the rear of the casing until it is tight into the cutout hole.
FIGURE A
6
Advertisement
Table of Contents
