Mitsubishi Electric MU-GD08NDMU-C1 Service Manual page 15

MU-GD10ND MU-GD12ND
9-2. MU-C18VC
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws fixing the top panel. (See Photo 2 and
3.)
(2) Remove the top panel. (See Photo 3.)
(3) Remove the screw fixing the service panel. (See Photo 3.)
(4) Pull down the service panel and remove it. (See Photo 3.)
(5) Remove the screws fixing the cabinet.
(6) Remove the cabinet.
(7) Disconnect the indoor/outdoor connecting wire.
(8) Remove the screws fixing the back panel.
(9) Remove the back panel.
Photo 3
Screw of the
cabinet
2. Removing the electrical parts
(1) Remove the service panel and the cabinet. (Refer to 1.)
(2) Remove the following parts.
•Compressor capacitor (C1)
•Outdoor fan capacitor (C2)
•Terminal block (TB)
•Compressor contactor (52C)
Screws of the
top panel
Service
panel
Screw of the
service panel
Direction
to remove
Hooks
15
PHOTOS
Photo 1
Screws of the front panel and motor support
Screws of the cabinet
Photo 2
Photo 4
Lead clamp
MU-GD10ND
Outdoor fan Connector
capacitor (C2)
Terminal
block (TB2)
Earth screw of indoor/
outdoor connecting wire
Screws of the
top panel
Screws of
the cabinet
Compressor
capacitor (C1)
Terminal
block(TB1)
Earth screw of
power supply