Advertisement
Make sure your DVD system and TV are connected and turned on!
1
2
3
4
5
6
7
8
9
10
11
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
Audio cables
(white, red)
Composite video cable
(yellow)
Detailed playback features and additional functions are described in the
Plug & Play
Turn on the system.
"AUTO INSTALL - PRESS PLAY" will be displayed.
Press PLAY 2; on the system to start installation.
Playing a disc
Press DISC1/2/3 on the remote control.
You can also select the DISC (DISC1
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
CLOSE 0 on the front of the DVD system and load discs, then press
Press OPEN
0
CLOSE 0 again to close the disc tray.
the corresponding OPEN
0
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
down.
Playback will start automatically.
1/¡/5/4
If a disc menu appears, use
then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow
the instructions given in the disc menu.
To stop playback, press STOP 9.
Playing Game
Press AUX/GAME to select GAMEPORT mode.
Turn on the TV and select the correct Video In mode.
Press MIX-IT to mix the game sound to your desired music source.
Start playing your favorite game.
component video
cables (red, blue,
green)
AA size
batteries
accompanying owner's manual
2
3) on the front panel.
0
0
buttons on the remote to make the necessary selection,
ALL
ALL
MW loop
antenna
3
FM wire antenna
AC power cable
Advertisement
