Advertisement
Quick Links
INSTALLATION INFORMATION
EMG MODELS: EMG-H-X, HA-X, 58-X, 60-X, 60A-X, 81-X, 85-X
SPECIFICATIONS:
Logo Color*
Magnet Type **
Resonant Frequency (KHz)
Output Voltage (String)
Output Voltage (Strum)
Output Noise (60 Hz)
Output Impedance (Kohm)
Current @9V (Microamps)
Battery Life (Hours)
Maximum Supply (Volts DC)
*Note: Logo Colors are not distinguished on Chrome and Gold Models
**Note: Magnet Type: A (Alnico) A/S (Alnico/Steel) C (Ceramic) C/S (Ceramic/Steel)
Installation notes:
EMG-X Series Pickups are compatible with all EMG Active Pickups. They use the connector system for easy installation, avoiding the need to solder.
Older EMG Pickups may need to be soldered, while the newer systems can be easily connected and modified. The X-Series Active Tone Control (VLPF)
is compatible with older EMG Pickups and can be used in place of the passive tone control used with other EMG Active Pickups.
EMG accessories like the EXG, SPC or RPC Controls can be added to any EMG Pickup System without the need for an extra battery.
Included with each pickup:
1 VOLUME CONTROL (25K)
1 ACTIVE VLPF TONE CONTROL
.235
(6)
.390
.310
(8)
(10)
STEREO OUTPUT
JACK
BATTERY
BUSS
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2014 Copyright EMG INC. All Rights Reserved.
MODEL:
H-X
HA-X
White
Gold
C
A
4.52
4.05
1.00
1.00
3.00
3.00
-107
-108
2.00
2.00
80
80
3000
3000
27
27
ADJUSTMENT
SCREWS & SPRINGS
2 PICKUP IN/ OUT
BATTERY BUSS
B245
1.50
(38.1)
.900
(22.8)
58-X
60-X
Gold
Grey
A/S
C
1.60
2.28
2.00
3.00
6.00
8.00
-102
-107
2.00
2.00
80
80
3000
3000
27
27
PICKUP CABLE 15" (38cm)
2 CONNECT CABLES 5.5" (14cm)
OUTPUT CABLE 6" (15cm)
SUPPLY CABLE 5.5" (14cm)
BATTERY CABLE 7" (18cm)
- 9V +
2.75
(69.8)
3.09
(78.5)
3/48 MOUNTING HOLES
60A-X
81-X
Gold
Silver
A
C/S
1.84
1.72
3.00
4.00
8.00
8.50
-105
-105
2.00
2.00
80
80
3000
3000
27
27
.725
(18.4)
85-X
Gold
A
1.91
4.00
8.50
-108
2.00
80
3000
27
Advertisement
Related Manuals for EMG EMG-H-X
Summary of Contents for EMG EMG-H-X
- Page 1 Warranty All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This warranty covers only those pickups and accessories sold by authorized EMG Dealers.
- Page 2 If you are installing two pickups go to page 3 and begin there. BUSS Installation (One Pickup Guitars): Diagram #2 One Pickup 1) Plug the pickup cable onto the EMG Pickup header as shown One Volume - 9V + in diagram #1 and route the cable to the control cavity. BATTERY...
- Page 3 2) Remove the strings, remove any existing Pickups and controls 2) Remove the strings, remove any existing Pickups and controls Guitars with two pickups and a selection switch will use the EMG B245 Pickup Buss. (remember the order and function of each control) (remember the order and function of each control) The Pickup Buss is a convenient way to wire your guitar without soldering.
- Page 4 - 9V + BATTERY NEG (-) GROUND NOTE REVERSED CONNECTOR NECK P/U MASTER ACTIVE TONE (VLPF) OUTPUT BRIDGE P/U OUTPUT CABLE NK VOLUME NECK PICKUP Diagram #7 2 Pickups Toggle Style Switch Volume each Pickup (Volumes are independent) BR VOLUME Master Tone BRIDGE PICKUP 2 Pickups / Toggle Select Switch / 2 Volumes and 2 Tones...