Advertisement

Quick Links

FIBT/MIBT Series
Fiber Optic 1310nm CATV Transmitters
FIBT
(stand alone)
Model
Stock No.
FIBT-S3A-106C 7403C 6
FIBT-S3A-108C 7403C 8
FIBT-S3A-110C 7404C 10
FIBT-S3A-112C 7404C 12
FIBT-S3A-114C 7404C 14
MIBT
(modular)
Model
Stock No.
MIBT-S3A-106B
7410B 6
MIBT-S3A-108B
7410B 8
MIBT-S3A-110B
7410B 10
MIBT-S3A-112B
7410B 12
MIBT-S3A-114B
7410B 14
Status
ACTIVE
©2014 Blonder Tongue Laboratories, Inc. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of their respective owner.
Description
+ 6 dBm, 1000 MHz, FC/APC Connector
+ 8 dBm, 1000 MHz, FC/APC Connector
+10 dBm, 1000 MHz, FC/APC Connector
+12 dBm, 1000 MHz, FC/APC Connector
+14 dBm, 1000 MHz, FC/APC Connector
Description
+ 6 dBm, 1000 MHz, FC/APC Connector
+ 8 dBm, 1000 MHz, FC/APC Connector
+10 dBm, 1000 MHz, FC/APC Connector
+12 dBm, 1000 MHz, FC/APC Connector
+14 dBm, 1000 MHz, FC/APC Connector
Date
Document No.
July 30, 2014
651209800E
800-523-6049
www.blondertongue.com
Stock No.
Stock No.
7403C/7404C
7403C/7404C
/7410B
/7410B
USER MANUAL
USER MANUAL
Issue No.
Author
1
KK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FIBT Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Blonder tongue FIBT Series

  • Page 1 +14 dBm, 1000 MHz, FC/APC Connector Status Date Document No. Issue No. Author ACTIVE July 30, 2014 651209800E 800-523-6049 www.blondertongue.com ©2014 Blonder Tongue Laboratories, Inc. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of their respective owner.
  • Page 2: Table Of Contents

    FIBT/MIBT Series Instruction Manual Table of Contents Performance Characteristics Safety Precautions ................3 Laser Safety Procedures .
  • Page 3: Performance Characteristics

    Always double check that power is disconnected before using such devices. If possible, completely disconnect the unit from any power source. If you have questions about laser safety procedures, please call Blonder Tongue before powering your product. Laser safety classes for the AM/VSB Link:...
  • Page 4: Specifications

    FIBT/MIBT Series Instruction Manual SPECIFICATIONS Optical / RF Power Operating Wavelength: 1310 nm Power Supply Voltage: 110/220 VAC Required Fiber Bandwidth: 1,000 Min. MHz Power Supply Frequency: 50/60 Hz Power Dissipation: 25 W Input Return Loss: =/>16 dB @ 75 Ω Back Reflection: -50 min.
  • Page 5: Specification Notes

    The result will be a noisy, grainy picture with diagonal bars. Blonder Tongue recommends that all fiber connections be FC/APC, SC/APC or fusion spliced.type or fusion spliced. There is some folklore which suggests that the only critical backreflection is the one closest to the transmitter.
  • Page 6: Shipping And Handling Precautions

    +14 dBm 15 dB FC/APC * NOTE: SC/APC connectors are available as an option. Order as Blonder Tongue Stock No. 7403CS-XX, 7404CS-XX, 7410BS-XX. Inspection Remove the unit from its shipping container. Any in-shipment damage that may have occurred should be visually apparent.
  • Page 7: Fibt/Mibt Front Panel Drawings

    LED turns green. If initial recorded level indicates a laser problem. If this happens, the the LED turns red at any other time, this may indicate a laser transmitter should be returned to Blonder Tongue for servicing. failure. D. Ground Connection...
  • Page 8: Fibt/Mibt Rear Panel Drawings

    FIRE HAZARD REPLACE WTIH SAME TYPE FUSE M A D E I N U S A FIBER BROADBAND TRANSMITTER FUSE 250V, 1.0A, SLO-BLO BLONDER TONGUE LABORATORIES, INC. STATUS Figure 2.3 FIBT Rear Figure 2.4 MIBT Rear 2.5.1 Rear Panel Diagram Notes RF Input (F Connector) M.
  • Page 9: Mibt "Danger Invisible Laser Radiation" Label Instructions

    FIBT/MIBT Series Instruction Manual MIBT “Danger Invisible Laser Radiation” Label Instructions Two additional danger labels are supplied with each MIBT transmitter. The self-sticking labels must be applied to the front and rear of the MIPS-12C power supply which powers the MIBT. See the figures below for the sticker application locations.
  • Page 10: Application Data - Figure 3.1 - Transmitter Level Per Channel Vs. Number Of Channels

    10 FIBT/MIBT Series Instruction Manual Application Data 100 110 Number of Channels Figure 3.1 – Transmitter Level per Channel vs. Number of Channels...
  • Page 11: Operating Instructions

    4) Connect the RF analog output on the receiver to the monitor input. The monitor input should present a 75 Ohm impedance. When using an integrated receiver/amplifier such as the Blonder Tongue FRDA Series, do not overload the TV monitor. Use appropriate attenuators or couplers as required.
  • Page 12: Maintenance Instructions

    12 FIBT/MIBT Series Instruction Manual MAINTENANCE INSTRUCTIONS Performance Verification & Maintenance No user maintenance is required. The fiber optic video link contains no user-serviceable parts and requires no routine service. Contact the factory if the unit requires warranty repair work. See Section 5.0 for Troubleshooting. Cleaning If the units need to be cleaned, avoid the use of all solvents and use low-pressure clean air to remove loose dirt.
  • Page 13: Troubleshooting

    TROUBLESHOOTING Troubleshooting A number of indicator LED’s are available to assist in trouble-shooting the link. These allow the user to quickly assess the nature of any major unit malfunctions. If problems persist contact Blonder Tongue’s System Engineering Department. Problem Check...
  • Page 14 Returning Product for Repair (or Credit) A Return Material Authorization (RMA) Number is required on all products returned to Blonder Tongue, regardless if the product is being returned for repair or credit. Before returning product, please contact the Blonder Tongue Service Department at 1-800-523-6049, Ext.
  • Page 15 10. The cost of the extended warranty is 8% of the purchase price for a 1 or 2 year extension beyond the Blonder Tongue standard warranty. e.g. A product price of $1000 will be $80 for the 1 year (12 mos) and additional $80 for 2 year (24 mos) extension for a total of $160.
  • Page 16 BT may determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may the case of software, licensed) by Seller which is defective in materials or workmanship or fails to meet the applicable specifications that are in effect on the date of meet the specifications which are in effect on the date of shipment or such other specifications as may have been expressly...

Table of Contents