BIDA Series Instruction Manual Section 1 — General & Safety Instructions The STOP sign symbol is intended to alert you to the presence of REQUIRED operating and maintenance (servicing) instructions that if not followed, may result in product failure or destruction.
Page 4
Unplug the unit from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the unit. å Do not use accessories or attachments not recommended by Blonder Tongue, as they may cause hazards, and will void the warranty. å...
Page 5
BIDA Series Instruction Manual NOTE: GAIN SLOPE CONTROL CONTROL Passive Return Path: Short Plug P1 on J11 and P3 on J13 to “passive” and P2 on J12 to “off”. FULL FLAT Active Return Path: Short Plug P1 on J11 and P3 on J13 to “active”...
Page 7
Stock No. 5477 (for BIDA 750 MHz) = BIDA CE-7-(*) Plug-in flat attenuator pad for reducing forward and/or return gain in BIDA series amplifiers. The BIDA-FA is Stock No. 5478 (for BIDA 860 MHz) = BIDA CE-8-(*) avail able in fixed values of 1-20 dB in 1 dB steps. Be fore Stock No.
10. The cost of the extended warranty is 8% of the purchase price for a 1 or 2 year extension beyond the Blonder Tongue standard warranty. e.g. A product price of $1000 will be $80 for the 1 year (12 mos) and additional $80 for 2 year (24 mos) extension for a total of $160.
BT may determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may the case of software, licensed) by Seller which is defective in materials or workmanship or fails to meet the applicable specifications that are in effect on the date of meet the specifications which are in effect on the date of shipment or such other specifications as may have been expressly...
Need help?
Do you have a question about the BIDA Series and is the answer not in the manual?
Questions and answers