Klipsch RSB-6 - Sound Bar + Wireless Subwoofer Manual

INSIDE

International Adapters Included.

SOUNDBAR

SOUNDBAR PLACEMENT

TURN HDMI CEC ON

(OFF BY DEFAULT)

Repeat Steps to Turn Off
Current Source Flashes 3X

*NOTE* CEC must be turned ON to enable audio through an HDMI-ARC connection

TURN OFF TV SPEAKERS

CONNECTIONS

HDMI-ARC

A Basic TV HDMI input will not transfer the TV audio signal to the Soundbar. The RSB-6 Soundbar will only receive TV audio through HDMI-ARC (with CEC turned ON), Optical or Analog connection.

DIGITAL OPTICAL

IF TV HAS NO OPTICAL OUT SEE NEXT PAGE

CABLE NOT INCLUDED

3.5mm AUXILIARY

CABLE NOT INCLUDED

SUBWOOFER PLACEMENT

SUBWOOFER WIRELESS CONNECTION

SUBWOOFER RECONNECT

REMOTE

	Bluetooth® Source Select		Analog Source Select		HDMI Source Select
	On/Off		Digital Optical Source Select		Track Backward Play/Pause Track Foward
	LEDs On/Off (Soundbar)		TV Source Select (HDMI-ARC)		Subwoofer Level Down Subwoofer Level Up
	Dialog Enhance Mode On/Off				System Volume Up System Volume Down
	Virtual Surround Mode On/Off				Mute
	Night Mode On/Off

SURROUND MODES

DOLBY AUDIO

• Only active if receiving a Dolby^® Digital signal
• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories

VIRTUAL SURROUND MODE

• Klipsch Custom DSP
• Independent of the EQ settings (Natural, Voice, Night)
• Can be ON regardless of Dolby Digital status

DIALOG ENHANCE MODE

• Optimizes EQ for Dialog
• Can be ON regardless of Dolby Status or Virtual Surround Mode
• Only one EQ profile active at one time (Natural, Dialog Enhanced, or Night)

NIGHT MODE

• Reduces Dynamic Range
• Subwoofer OFF
• Can be ON regardless of Dolby Status or Virtual Surround Mode
• Only one EQ profile active at one time (Natural, Voice Enhanced, or Night)

BLUETOOTH WIRELESS TECHNOLOGY

PAIR

* Example only. Your device may differ.

RECONNECT

TV REMOTE PROGRAMMING

If you want to use the TV remote to control the soundbar, you can program the soundbar to take commands from your TV remote

REMOTE CONTROL CODES

FOR UNIVERSAL OR CABLE REMOTES

* MUST HAVE AUDIO/AUX BUTTON OR AUDIO·SB BUTTON
** RED CENTER BUTTON
NOTE: NOT ALL UNIVERSAL REMOTES ARE COMPATIBLE

LED ON/OFF

NOTE: LEDs will turn off after 5 seconds of inactivity

FACTORY RESET

Clears Bluetooth pairing history and user programmed IR commands

CARE AND CLEANING

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Klipsch RSB-6 - Sound Bar + Wireless Subwoofer Manual