Omron 3G3M1-STD Manual page 10

Output terminals (ROA, ROB) use relays, and may remain ON, OFF or undetermined when
their lifetime is reached. For safety, equip the inverter with an external protective function.
Not doing so may result in fire or accidents.
Do not dismantle, repair or modify the product.
Doing so may result in injury or electric shock.
Always carry out the daily and periodic inspections described in the User's Manual. Use
ofthe inverter for long periods of time without carrying out regular inspections could result
inmalfunction or damage of the inverter, and an accident or fire could occur.
This may result in fire or accident.
It is recommended that parts for periodic replacement be replaced in accordance with the
standard replacement frequency indicated in the User's manual. Use of the inverter for long
periods of time without replacement could result in malfunction or damage of the inverter,
and an accident or fire could occur.
This may result in fire or accident.
It is recommended that periodic inspections be carried out every one to two years,
however, they should be carried out more frequently depending on the usage conditions.
Not doing so may result in fire or accident.
When using a DC reactor, AC reactor, braking resistor or noise filter, etc., there is the
possibility that a human body may touch the main circuit terminal block (live parts). In such
cases, take measures such as installing the inverters in a location not easily accessible by
humans.
Not doing so may result in a serious injury due to an electric shock.
There are conditions for compliance with the EU Low Voltage Directive and Machinery
Directive. Strictly observe the conditions listed in the instruction manual or user's manual.
Not doing so may result in a serious injury due to an electric shock or fire.
10